Corrosion Primer

• Customization: Available
• Color: Gray, Iron Red
• Main Raw Material: Acrylic
• Other Names: Acrylic Anti-Corrosion Primer
• Mixing Ratio (Weight: One-Component, Stir Well with Mechanical Stirring
• Modelnumber: BS-06
• Bulk Solids: 503%
• Application Method: Brush
• Specific Gravity (After Mixing): 1.40.1g/Ml
• Selling Units: Single Item
• Usage: Surface-Treated Steel Substrates
• Fully Cured: Pl
• Single Package Size: 6.5X6.5X19.Cm
• Typical Dry Film Thickness: 40um
• Typical Wet Film Thickness: 80um
• State: Liquid Coating
• Single Gross Weight: 20.000 Kg
• Theoretical Coating Rate: 0.112kg/M2/40um
• Trademark: Jinglin
• Origin: Jiangsu, China

Product Description

Color	Gray, iron red
Mixing ratio (weight)	One-component,Stir well with mechanical stirring
Specific gravity	1.4±0.1g/ml
Bulk solids	50±3%
Typical dry film thickness	40um
Typical wet film thickness	80um
Theoretical coating rate	0.112kg/m²/40um
Surface stem	≤0.5h
Practical	≤2h
Fully cured	7d
Mixed use period	There is no activation period limit for single components
Diluent	Special thinner for PT
Applicable substrates	Surface-treated steel substrates
Front-end coating	-
Back-end coating	Acrylic topcoat

Introduction
It is composed of thermoplastic acrylic resin, anti-rust pigment and auxiliary solvent. It has good corrosion resistance, initial water resistance, good construction performance and rapid drying. It can be coated with chlorinated rubber, acrylic acid, chlorosulfonated polyethylene, high chlorinated polyethylene and other topcoats
the construction conditions, and the spraying pressure.
Brush coating is limited to small areas such as free edges and dead corners, and spraying is recommended for large areas.The above construction factors are for reference only.

Application
It is suitable for indoor and outdoor concrete and walls, and can also be used as anti-corrosion primer for various steel
structure surfaces with low anti-corrosion performance coating system.

 

Q1 Are you a manufacturer and support factory site visits?
A: We are a professional paint manufacturer with more than 30 years of experience and support buyers to visit our factory.

Q2 What are your main products?
A: Our main products are all kinds of industrial anti-corrosion coatings, marine coatings, floor coatings, new water-based
environmental protection coatings, automotive coatings and so on.

Q3 Is the coating product sold by your company in compliance with the relevant entry permit for each country?
A: All types of coating products produced by our company are in compliance with international relevant quality standards and requirements. For some countries, there are special access certification licenses. Our company will conduct targeted product verification.

Q4 Does your company still need an international agent to join?
A: To meet the requirements of customers, we welcome you to become our agent dealer, become our agent dealers will receive more favorable prices and account period support, specific operation details please contact our company account manager to confirm.