Two-Component Solution for The Petroleum and Petrochemical Industry Epoxy Zinc-Rich Primer Hx-068

• Customization: Available
• CAS No.: 623-20-1
• Color: Gray
• Other Names: Epoxy Primer
• Modelnumber: Hx-068
• Application Method: Spray
• Mixing Ratio Weight: One-Component, Stir Well with Mechanical Stirring
• Usage: Appliance Paint
• Selling Units: Single Item
• Fully Cured: Pl
• Mainraw Material: Polyurethane
• State: Liquid Coating
• Single Gross Weight: 20.000kg
• Theoretical Coating Rate: 0.112kg/M2/40um
• Surface Stem: 8h
• Practical: 18h
• Single Package Size: 6.5X6.5X19cm
• Trademark: Jinglin
• Origin: Jiangsu, China

Product Description

Color	Various colors (except silver lacquer)
Mixing ratio (weight)	One-component,Stir well with mechanical stirring
Specific gravity (after mixing)	1.4±0.1g/ml
Bulk solids	50±3%
Typical dry film thickness	40um
Typical wet film thickness	80um
Theoretical coating rate	0.112kg/m²/40um
Surface stem	≤8h
Practical	≤18h
Fully cured	7d
Mixed use period	There is no activation period limit for single components
Diluent	Special thinner for PT
Applicable substrates	Surface-treated steel substrates
Front-end coating	Alkyd primer
Back-end coating	-
Back-end coating	Alkyd topcoat

Product Introduction
It is composed of long-oil alkyd resin, titanium dioxide and other coloring pigments, driers, additives and solvents. The paint film is bright, colorful, has good color retention and weather resistance, water resistance and oil resistance, and has good flexibility, adhesion and seawater impact resistance.

Product Use:
It is suitable for protection and decorative topcoat on the surface of various steel structures such as power plants, steel
plants, chemical plants, bridges, containers, hydraulic steel gates, dry gas cabinets, etc.

Q1 Are you a manufacturer and support factory site visits?
A: We are a professional paint manufacturer with more than 30 years of experience and support buyers to visit our factory.

Q2 What are your main products?
A: Our main products are all kinds of industrial anti-corrosion coatings, marine coatings, floor coatings, new water-based
environmental protection coatings, automotive coatings and so on.

Q3 Is the coating product sold by your company in compliance with the relevant entry permit for each country?
A: All types of coating products produced by our company are in compliance with international relevant quality standards and requirements. For some countries, there are special access certification licenses. Our company will conduct targeted product verification.

Q4 Does your company still need an international agent to join?
A: To meet the requirements of customers, we welcome you to become our agent dealer, become our agent dealers will receive more favorable prices and account period support, specific operation details please contact our company account manager to confirm.