Anti-Rust Metal Pain Acid-Resistant Anticorrosive Industrial Food Machinery Acrylic Polyurethane Topcoat Paint

• Customization: Available
• Color: All Kinds
• Main Raw Material: Acrylic
• Model NO.: PU1000
• Other Names: Acrylic Polyurethane Topcoat
• Bulk Solids: 503%
• Application Method: Brush
• Selling Units: Single Item
• Specific Gravity (After Mixing): 1.200.1g/Ml
• Usage: Surface-Treated Steel Substrates
• Typical Dry Film Thickness: 40mm
• Typical Wet Film Thickness: 80mm
• State: Liquid Coating
• Single Gross Weight: 20.000 Kg
• Theoretical Coating Rate: 0.096kg/M2/40um
• Surface Stem: 2h
• Practical: 24h
• Single Package Size: 6.5X6.5X19.Cm
• Trademark: Jinglin
• Origin: Jiangsu, China

Product Description

Color	All kinds
Glossy (GU 60°)	Above 60 (60°), non-highlight.
Mixing ratio (weight)	20:2 Stir well with mechanical stirring
Specific gravity (after mixing)	1.20±0.1 g/ml
Bulk solids	50±3%
Typical dry film thickness	40mm
Typical wet film thickness	80mm
Theoretical coating rate	0.096kg/m²/40um
Surface stem	≤2h
Practical	≤24h
Fully cured	7d
Mixed use period	≤4h23±2
Diluent	ZH polyurethane thinner
Applicable substrates	Surface-treated steel substrates
Front-end coating	Epoxy intermediate coat and other recommendations
Back-end coating	Polyurethane, fluorocarbon, etc

Product Introduction
A two-component polyurethane topcoat consisting of weather-resistant isocyanate and hydroxy acrylic resins, coloring pigments,additives and solvents. The paint film is tough, not easy to chalk, good decoration, good water resistance and oil resistance.

Product Use:
It is suitable for general steel structure protection, machine tools, food machinery and other surfaces as weather-resistant
polyurethane topcoats.

Q1 Are you a manufacturer and support factory site visits?
A: We are a professional paint manufacturer with more than 30 years of experience and support buyers to visit our factory.

Q2 What are your main products?
A: Our main products are all kinds of industrial anti-corrosion coatings, marine coatings, floor coatings, new water-based
environmental protection coatings, automotive coatings and so on.

Q3 Is the coating product sold by your company in compliance with the relevant entry permit for each country?
A: All types of coating products produced by our company are in compliance with international relevant quality standards and requirements. For some countries, there are special access certification licenses. Our company will conduct targeted product verification.

Q4 Does your company still need an international agent to join?
A: To meet the requirements of customers, we welcome you to become our agent dealer, become our agent dealers will receive more favorable prices and account period support, specific operation details please contact our company account manager to confirm.